2013 Polaris Ness Signature Series Cross Country Tour Owners Manual - Page 54
2013 Polaris Ness Signature Series Cross Country Tour Manual
Page 54 highlights
Operation Using Cruise Control (if equipped) Resume Speed After disengaging the cruise control with the brake, throttle or clutch, wait at least 3 seconds, then press the resume button (RES) to return to the set speed. If the resume button is pressed within 3 seconds of disengaging, the cruise control may not engage, even if the cruise control indicator illuminates. This is a safety feature that prevents cruise control from engaging if a button is stuck. To continue using cruise control, disengage it. Wait at least 3 seconds, then press the resume button. Tip: Turning the cruise control master switch off will erase the set speed from memory and disengage the cruise control. Resume Accelerate Tap and release the accelerate (ACC) button to increase speed in approximately 1 MPH (1-2 km/h) increments. Press and hold the ACC button to accelerate to a new SET speed (resets when button is released). Tip: If you use the throttle to accelerate and then release it, the cruise control will resume the previously set speed. Accelerate Decelerate Tap and release the decelerate (DEC) button to decrease speed in approximately 1 MPH (1-2 km/h) increments. Press and hold the DEC button to decelerate to a new SET speed (resets when button is released), or to the minimum cruise speed of 25 MPH (40 km/h). Cancel Cruise Control To temporarily cancel the cruise control and allow use of the resume feature: Off • apply the brakes • or close the throttle • or disengage the clutch To cancel the cruise control and erase the set speed from memory, press OFF. Decelerate 52