1997 Oldsmobile Bravada Owner's Manual - Page 80

Turn and Lane Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. If a bulb is burned out, replace it to help avoid an accident. If the arrows don't go on at all when you signal a turn, check the fuse (see "Fuses and Circuit Breakers" in the Index) and for burned-out bulbs. If you have a trailer towing option with added wiring for To signal a turn, move the lever all the way upor down. the trailer lamps, a different turn signal flasher is used. When theturn is finished, the lever will return automatically.With this flasher installed, the signal indicator will flash even if a turn signal bulb is burned out. Check the front An arrow on the instrument and rear turn signal lamps regularly to make sure they panel will flash in the are working. direction of the turn or lane change. Headlamp HighLow Beam Changer To change the headlamps from low to high-beam or high to low-beam, pull the multifunction lever all the way toward you. Then release it. When the high beams are on, this indicator light on the instrument panel will also be on. To signal a lane change, just raise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it. As you signal a turn or a lane change, if the arrows don't flash but just stay on, a signal bulb may be burned out and other drivers won't see your turn signal. 2-26