1997 Oldsmobile Bravada Owner's Manual - Page 253

Front Reading Lamps 1 . Use a coin or small screwdriver to unscrew the Vanity Mirror Lamps 1. Insert the blade of a small screwdriver into the center slot at the bottom of the lens. center of the overhead console lamp lens while pressing i n on the lamp assembly. 2. Remove the lamp assembly from the console. 3. Remove the bulb assembly from the lamp assembly. 2. Gently pry the screwdriver down in order to lift out the lens. 3. Pry out the bulb. 4. Press the new bulb into place. 4. Pull the bulb straight out of the base. 5 . Put a new bulb into the bulb base. 6. Install the bulb assembly into the lamp assembly. 7. Place the lamp assembly into the console, turning it to latch i t into place. 8. Install the lens. 5. Slide the side tabs of the lens under the side of the vanity assembly frame. 6. Rotate the lens downward. 7. Snap the lens into the frame. 6-33