1997 Oldsmobile Bravada Owner's Manual - Page 265

Using Foam-Type Cleaneron Fabric 1 . Vacuum and brush the area to remove any loose dirt. Using Solvent-Qpe Cleaner on Fabric First, see if you have to use solvent-type cleaner at all. Some spots and stains will clean off better with just water and mild soap. 2. Always clean a wholetrim panel or section. Mask surrounding trim along stitch 01-welt lines. 3. Mix Multi-Purpose Powdered Cleaner following the directions on the container label. If you need to use a solvent: 1. Gently scrape excess soil from the trim material with a clean, dull knife or scraper. 4. Use suds only and apply with a clean sponge. Don't saturate the material and don't rub it roughly. 5 . As soon as you've cleaned the section, use a sponge to remove the suds. 2. Use very little cleaner, light pressure and clean cloths (preferably cheesecloth). Cleaningshould start at the outside of the stain, "feathering" toward the center. 3. Keep changing to a clean section of the cloth. 6. Rinse the section with a clean, wet sponge. 7 . Wipe off what's left with a slightly damp paper towel or cloth. 4. When you clean a stain from fabric, immediately dry the area with a blow dryer to help prevent a cleaning ring. 8. Dry it immediately with a blow dryer. 9. Wipe with a clean cloth. 6-45