1997 Oldsmobile Bravada Owner's Manual - Page 251

5 . Turnthe bulb counterclockwise to remove it. 6. Put the new bulb into the headlarnp lens assembly and turn it clockwise until it is tight. 7. Plug in the electrical connector. 3. Turn the socket counterclockwise and pull it out. 4. Holding the base of the bulb, pull the bulb straight out of the socket. 5 . Push the new bulb into the socket until it clicks. 6. Put the socket back into the turn signal lamp assembly and turn it clockwise until it locks into place. 8. Put the headlamp lens assembly back into the vehicle. Install and tighten the screws. Front Turn Signal Lamps 1. Remove the headlamp assembly. 2. Reach down and behind the turn signal lamp assembly. 6-31