Xerox 490ST System Administration Guide - Page 81

11. Microsoft Windows NT 4.X Go to the server and... NOTE This procedure assumes that any TCP/IP components necessary for network installation have already been assigned to the Document Centre. If these components have not been configured, please refer to the appropriate information contained within the section entitled Dynamic/Static IP Addresses & WINS before continuing further. 1. Verify the correct software is loaded. a) At the Desktop, right mouse click the Network Neighborhood icon and select Properties. Click on the Protocols TAB and verify that the TCP/IP protocol has been loaded. b) Select the Services TAB and verify that Microsoft TCP/IP Printing is loaded. If this software is not present, install it using the documentation provided by Microsoft. Then return to the next step in this document. 2. Add the printer. a) Open the Control Panel and double-click Printers icon. Double-click Add Printer. The Add printer Wizard starts. b) Verify that My Computer is selected and click Next>. c) Click Add Port. From the list that appears select LPR Port. Click New Port. d) This will open up the Add LPR compatible printer window. Type in the IP address of the Document Centre printer and the printer name and select OK. Note that the printer name is case sensitive. e) The Wizard will return you to the previous dialog. Verify the new IP address you entered is in the list and correct. f) The check box to the left of the address must be checked; if it is not, check it then select Next>. 11. Microsoft Windows NT 4.X Server Network Xerox Document Centre System Administration Guide Page 11 - 3