Xerox 490ST System Administration Guide - Page 72

f) At the next screen, press the Workgroup Name button, using the touch panel keys. Enter the name of the workgroup in which you want the printer to appear then press Save. g) Press the SMB Host Name (this will set the NetBIOS name) button, using the Touch Screen keys, enter the desired text then press Save. h) OPTIONAL STEP: Press the SMB Host Description button and enter the desired text for this item, then press Save. i) Press Save again to return to the Microsoft Networks screen. j) Press the Printer Description button. k) Press the Printer Name button, using the Touch Screen keys, enter the desired text for this item then press Save. l) OPTIONAL STEP: Press the Printer Description button, using the touch panel keys and enter the desired text for this item, then press Save. m) Press Save again to return to the Microsoft Networks screen. n) Press the Connections button o) Touch the Maximum Connections soft button on the Touch Screen and on the keypad enter the desired maximum connection number between 1 and 30. This number should be set to equal or greater than the number of workstations on your Peer to Peer network. p) Touch the Connection Timeout soft button on the Touch Screen. On the keypad enter the desired number of seconds between 0 and 9999. q) Press Save to exit the Connections Screen. 4. Exit the Tools Menu. a) Press the Exit Tools button. The printer will store the settings you have made. Page 9 - 4 Xerox Document Centre System Administration Guide