Xerox 490ST System Administration Guide - Page 253

20. Scan Setup without CentreWare Who Should Use This Guide NOTE This chapter is a companion to the Network Scanning Services Guide and is intended to be used by System Administrators who are setting up network scanning without using CentreWare Network Scanning Services. CentreWare Network Scanning Services is intended for use on Windows based workstations. There are two other options for setting up scanning services: • Setting up Native Scanning • Setting up Scanning Using CentreWare Internet Services Both of these set up options require the use of procedures in this guide. For Setting up Scanning Using CentreWare Internet Services, you will need to complete some processes, and then refer to the Internet Services Guide to complete the set up. All of the procedures for setting up Native Scanning are included in this section. There are two options for file transfer if you are setting up Native Scanning or Scanning Using CentreWare Internet Services. • Setting Up Scanning - NetWare (NCP) • Setting Up Scanning - FTP (File Transfer Protocol) Procedures for both of these file transfer options are contained in this guide. If you will be using Xerox's CentreWare Network Scanning Services to set up scanning on the Document Centre, refer to the Network Scanning Services Guide guide now. To use the procedures in this guide effectively, you must have experience working in a network environment. You must also have access to the network and possess Supervisor (Administrator) rights. You may also require documentation provided by network and client workstation vendors. 20. Scan Setup without CentreWare Xerox Document Centre System Administration Guide Page 20 - 3