Tanaka TCG24ECPSL Manual - Page 6

English ○ If you accidentally bump or drop the unit, inspect it immediately to make sure there are no damage, cracks or deformations. ○ If the tool is operating poorly and produces strange noise or vibrations, turn off the engine immediately and ask your dealer to have it inspected and repaired. Continued use under these conditions could lead to injury or tool damage. ○ Use in accordance with local laws and regulations. Maintenance safety ○ Maintain the unit/machine according to recommended procedures. ○ Disconnect the spark plug before performing maintenance except for carburetor adjustments. ○ Keep others away when making carburetor adjustments. ○ Use only genuine Tanaka replacement parts as recommended by the manufacturer. CAUTION Do not disassemble the recoil starter. There is a possibility of personal injury with recoil spring. WARNING Improper maintenance could result in serious engine damage or in serious personal injury. Transport and storage ○ Carry the unit/machine by hand with the engine stopped and the muffler away from your body. ○ Allow the engine to cool, empty the fuel tank, and secure the unit/machine before storing or transporting. Failure to do so may result in fire or accidents. ○ Empty the fuel tank before storing the unit/ machine. It is recommended that the fuel be emptied after each use. If fuel is left in the tank, store so fuel will not leak. ○ Store unit/machine out of the reach of children. ○ Clean and maintain the unit carefully and store it in a dry place. ○ Make sure engine switch is off when transporting or storing. ○ When transporting and storing, either remove the cutting attachment or place the blade cover over the blade. ○ You have to secure the machine during transport to prevent loss of fuel, damage or injury. If situations occur which are not covered in this manual, take care and use common sense. Contact Tanaka dealer if you need assistance. 6