Tanaka TCG24ECPSL Manual - Page 2
Meanings Of Symbols - manual
View all Tanaka TCG24ECPSL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
English MEANINGS OF SYMBOLS NOTE: Some units do not carry them. Symbols WARNING The following show symbols used for the machine. Be sure that you understand their meaning before use. It is important that you read, fully understand and observe the following safety precautions and warnings. Careless or improper use of the unit may cause serious or fatal injury. Choke - Run position (Open) Choke - Start position (Closed) Read, understand and follow all warnings and instructions in this manual and on the unit. On/Start Always wear eye, head and ear protectors when using this unit. Off/Stop Do not use metal/rigid blades when this sign is shown on the unit. Keep all children, bystanders and helpers 15 m away from the unit. If anyone approaches you, stop the engine and cutting attachment immediately. Emergency stop Fuel and oil mixture Idle speed adjustment Be careful of thrown objects. Priming pump Shows maximum shaft speed. Do not use the cutting attachment min-1 whose max rpm is below the shaft rpm. Hot surface - Contact with hot surface can cause serious burns. Gloves should be worn when necessary, e.g., when assembling cutting equipment. Indicate handle location. Arrows which show limits for handle positioning. Use anti-slip and sturdy footwear. Indicates cutting attachment guard location for a trimmer head or semi-auto cutting head. Before using your machine • Read the manual carefully. • Check that the cutting equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment. See "MAINTENANCE". 2