Smeg DOU330X1 Instruction Manual - Page 15
Time Oven Mode Operation
View all Smeg DOU330X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Use & Care Manual ENGLISH Time Oven Mode Operation In double oven models, both ovens can be set independently to operate a timed mode. Be sure that the time-of-day clock is displaying the correct time. The timed mode turns off the oven at the end of the cook time. To Set a Timed Mode 1. Select the oven by means of [UPPER/LOWER] key, if necessary. 2. Select the cooking mode and the temperature by means of the knobs. The "ON" writing will appear in the display. 3. Touch [TIME] key until the "TIME" writings will appear in the display. 4. Touch [INC] or [DEC], the hour digits will begin flashing. Continue to set the desired cooking time. Keep in mind that the time required for the oven to reach the temperature must be included in the set cooking time. 5. Touch [TIME] again, the hours will be confirmed and the minute digits will begin flashing. 6. Touch [INC] or [DEC] to change the minutes. Hold the key to change by 10 minutes steps. Continue to set the desired cooking time. 7. Touch [TIME] once again or wait for a few seconds to confirm the cooking time value. Touch [INC] or [DEC], the hour digits will begin flashing. Continue to set the desired stop time. Touch [TIME] again, the hours will be confirmed and the minute digits will begin flashing. Touch [INC] or [DEC] to change the minutes. Hold the key to change by 10 minutes steps. Continue to set the desired stop time. Touch [TIME] once again or wait for a few seconds to confirm the stop time value. The clock automatically calculates the time of day at which the mode starts and stops. The "DELAY" writing is displayed until the starting time is reached. When a Timed Mode is running As soon as the oven actually starts cooking, the display shows the cooking time and counts down by one minute steps. The oven will cook for the programmed time. When the time expires, the oven automatically turns off, the writings "ON" and "TIME" start flashing and an "end of activity" beep sequence sounds. Reminder beeps will sound for up to fifteen minutes until any key is touched in order to recall the user attention. How to check a time value To Delay the Start of a Timed Mode Follow steps 1 through 6 or 7 above. Touch [TIME] key until "STOP TIME" will appear in the display. The control automatically calculates and displays the initial value, adding the cooking time already set to the time of day. Whenever it's necessary to check a time value that is not displayed, touch the [TIME] key until the proper writing is displayed to view the desired value for 5 seconds. Example: if the timer value is displayed and you want to check the cooking time, touch the [TIME] key until "TIME" is displayed to view the cooking time for 5 seconds. 15