Smeg DOU330X1 Instruction Manual - Page 14

Selecting the Oven Mode

Page 14 highlights

Use & Care Manual ENGLISH Selecting the Oven Mode Setting Cooking Mode and Temperature The following modes can be selected by moving the cooking mode knob to the desired position. To select Clean, the temperature knob must be moved into the appropriate Clean position too. Using [OPTIONS] key to select low temperature functions To move the cooking mode selector to Low Temp modes, one of the following functions must be displayed: OFF CONVECTION BAKE (CONV BAKE) CONVECTION BROIL (CONV BROIL) CONVECTION ROAST (CONV ROAST) PIZZA (MULTI PIZZA) BAKE (BAKE) BROIL (BROIL) DEHYDRATE(CONV DEHY) PROOF (WARM) DEFROST (CONV) WARMING (WARM PLUS) CLEAN Select the desired temperature by moving the selector or leave it in the PRESET position if the proposed value is fine. The temperature can be changed by 5°F or 5°C steps. As soon as one of the knobs is moved, the control switches automatically to display the value in the corresponding cavity. The corresponding writing "UPPER" or "LOWER" appears. Cavity will begin to heat, the "ON" writing is displayed when the selected oven is active, oven lights will turn on. "PREHEAT" writing will turn on. Once the oven has preheated, it will beep and switch the writing off. To change the temperature while cooking, simply turn the temperature knob until the display shows the desired value. Touch [UPPER/LOWER] to select the desired cavity and check the related temperature or time values, even is there's no need to change those. Move the cooking mode selector to OFF if you intend to stop cooking. DEHYDRATE (CONV DEHY) PROOF (WARM) DEFROST (CONV) WARMING (WARM PLUS) Touch [OPTIONS] key to toggle between these four modes. The last used is kept in memory for the next selection. Using Oven Lights A single light key activates the lights in either oven. If [LIGHT] key is touched when both ovens are off, lights in both the upper and lower oven will turn on. Touch [LIGHT] key again, and both oven lights will turn off. Oven lights turn on and off automatically when the door is opened and closed. When an oven is in use, oven lights turn on automatically when a mode is started. Oven lights will turn off automatically when the oven mode is cancelled. The lights do not operate in the Self-Clean mode. To manually control the interior oven lights in either the upper or lower oven if one or both ovens are in use: 1. Touch [UPPER/LOWER] and the display will indicate which oven is selected. 2. Touch [UPPER/LOWER] to select the other oven. 3. Touch [LIGHT] to turn lights on or off in the desired cavity. The triangles in the upper right corner of the display are active when a cavity is running, even if it is not selected on the display. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35

Use & Care Manual
ENGLISH
14
Selecting the Oven Mode
Setting Cooking Mode and Temperature
±²
The following modes can be selected by moving the
cooking mode knob to the desired position. To
select Clean, the temperature knob must be moved
into the appropriate Clean position too.
OFF
CONVECTION BAKE
(CONV BAKE)
CONVECTION BROIL (CONV BROIL)
CONVECTION ROAST (CONV ROAST)
PIZZA (
MULTI
PIZZA)
BAKE (BAKE)
BROIL (BROIL)
DEHYDRATE(CONV DEHY)
PROOF (WARM)
DEFROST (CONV)
WARMING (WARM PLUS)
CLEAN
±²
Select the desired temperature
by
moving the selector
or leave it in the PRESET position if the proposed
value is fine. The temperature can be changed by
5°F or 5°C steps.
±²
As soon as one of the knobs is moved, the control
switches automatically to display the value in the
correspond
ing
cavity. The corresponding writing
“UPPER”
or
“LOWER”
appears.
±²
Cavity will begin to heat, the
“ON”
writing is
displayed when the selected oven is active, oven
lights will turn on.
±²
“PREHEAT”
writing will turn on. Once the oven has
preheated, it will beep and switch the writing off.
±²
To change the temperature while cooking, simply
turn the temperature knob until the display shows
the desired value.
±²
Touch [UPPER/LOWER] to select the desired cavity
and check the related temperature or time values,
even is there’s no need to change those.
±²
Move the cooking mode selector to OFF if you
intend to stop cooking.
±²
The triangles in the upper right corner of the display
are active when a cavity is running, even if it is not
selected on the display.
Using
[OPTIONS]
key
to
select
low
temperature functions
±²
DEHYDRATE (CONV DEHY)
PROOF (WARM)
DEFROST (CONV)
WARMING (WARM PLUS)
±²
Touch [OPTIONS] key to toggle between these
four modes.
±²
The last used is kept in memory for the next
selection.
Using Oven Lights
±²
A single light key activates the lights in either
oven.
±²
If [LIGHT] key is touched when both ovens are off,
lights in both the upper and lower oven will turn
on. Touch [LIGHT] key again, and both oven lights
will turn off.
±²
Oven lights turn on and off automatically when the
door is opened and closed.
±²
When an oven is in use, oven lights turn on
automatically when a mode is started. Oven lights
will turn off automatically when the oven mode is
cancelled.
±²
The lights do not operate in the Self-Clean mode.
To manually control the interior oven lights in
either the upper or lower oven if one or both ovens
are in use:
1.
Touch [UPPER/LOWER] and the display will
indicate which oven is selected.
2.
Touch [UPPER/LOWER] to
select
the other
oven.
3.
Touch [LIGHT] to turn lights on or off in the
desired cavity.
To move the cooking mode selector to Low Temp
modes, one of the following functions must be
displayed: