Smeg DOU330X1 Instruction Manual - Page 12
Caution
View all Smeg DOU330X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
To remove oven rack from the oven: 1. Pull rack forward Use & Care Manual ENGLISH To replace an oven rack: 1. Place rear of rack between rack level guides 2. Lift rack up at front and then remove it 2. While lifting front of rack, slide rack in all the way while lowering the front Oven Telescopic Racks The extendable rack allows for easier access to cooking foods. It extends beyond the standard flat rack bringing the food closer to the user. CAUTION When the rack is outside of the oven, slide arms do not lock. They could unexpectedly extend if the rack is carried incorrectly. Extending slide arms could cause injury. Rack should only be held or carried by grasping the sides. NOTE: Always remove the extendable rack before self-cleaning the oven. CAUTION! To avoid burns, pull rack all the way out and lift pan above handle when transferring food to and from oven. Please refer to illustration on Page 7 if there is any question as to which side is the front of the rack. To remove extendable rack from the oven: 1. Lift of rack slightly and push it until the stop release To replace an extendable rack: 1. Grasp rack firmly on both sides. Place rack (including frame) above desired rack guide 2. Raise back of rack until frame and stop clear rack guide 2. Push all the way in until the back of the rack drops into place 3. Pull rack down and out 3. Pull both sections forward until stops activate. Rack should be straight and flat, not crooked 12