HP Neverstop Laser MFP 1200 User Guide - Page 82
Clear jams from the input tray, CAUTION
View all HP Neverstop Laser MFP 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Clear jams from the input tray CAUTION: Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused by sharp objects will not be covered by the warranty. When removing jammed media, pull the jammed media straight away from the product. Pulling jammed media out of the product at an angle can damage the product. NOTE: Depending on where the jam is located, some of the following steps might not be necessary. 1. Lift the scanner. 2. Lift the top cover, and then remove the imaging drum. CAUTION: To prevent damage, do not expose the imaging drum to light. Cover it with a piece of paper. 3. Remove the media stack from the input tray. 74 Chapter 9 Solve problems ENWW
Clear jams from the input tray
CAUTION:
Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage
caused by sharp objects will not be covered by the warranty.
When removing jammed media, pull the jammed media straight away from the product. Pulling jammed
media out of the product at an angle can damage the product.
NOTE:
Depending on where the jam is located, some of the following steps might not be necessary.
1.
Lift the scanner.
2.
Lift the top cover, and then remove the imaging drum.
CAUTION:
To prevent damage, do not expose the imaging drum to light. Cover it with a piece of paper.
3.
Remove the media stack from the input tray.
74
Chapter 9
Solve problems
ENWW