HP Neverstop Laser MFP 1200 User Guide - Page 75
Light status, Code on, display, State of the printer, Action, Er/01
View all HP Neverstop Laser MFP 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Table 9-2 Control-panel light patterns (continued) Light status Code on display State of the printer The Open Lid light is blinking until the lid is P2 opened. An ID Copy job has been started. The Resume light blinks after the lid is opened. Action When the Open Lid light blinks, open the lid and turn over the identification card, close the lid, and then press the Resume button to continue. Or press the Cancel button job. to cancel the current The Cancel light is on. Attention light and Paper light are blinking. Er/01 Cancel light is on. The input tray is empty. Load the input tray or press the Cancel button to cancel the current job. Attention light is blinking. Er/02 A door is open. Verify that the top cover is fully closed. Attention light is blinking. Resume light, Paper light, and Cancel light are on. Er/04 Paper is jammed in the input tray. Clear the jam. Press the Resume button to continue. Attention light is blinking. Paper light and Er/05 Cancel light are on. Paper is jammed in the imaging drum area. Clear the jam. Toner Warning light (on the toner level indicator) is blinking (amber). Reload Status light (next to the reload port) is on (white). Er/08 The toner level is too low for Add toner using a Toner Reload Kit. printing. Attention light and Imaging Drum light are Er/09 blinking. Reload Status light (next to the reload port) is amber and blinking rapidly. Er/11 The imaging drum has reached the end of its service life and must be replaced. Replace the imaging drum. There is a problem with the Toner Reload Kit. Use a different Toner Reload Kit. You must wait until the Reload Status light turns white before attempting to reload toner. ENWW Interpret control-panel light patterns 67