Epson TM-T88IV TM-T88IV Technical Reference Guide - Page 74
Number of Head Energizing Parts, Printable Area, Cutting Method, Receive Buffer, Memory Capacity
View all Epson TM-T88IV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Number of Head Energizing Parts For the TM-T88IV, the initial setting of the number of head energizing parts is "Auto energizing." You can change the setting to a customized value (See "Setting the Memory Switches" on page 43.); however it does not usually need to be changed. TM-T88IV TM-T88III Number of head energizing part • One-part energizing • Two-part energizing • Four-part energizing • Auto energizing Fixed to two-part energizing Printable Area The printable area (left/right margins, print start position from the autocutting position, print start position from the manual cutting position) of the TM-T88IV is the same as that of the TM-T88III. Cutting Method The TM-T88IV uses the partial cutting method (cutting with one point in left edge left uncut) as does the TM-T88III. Receive Buffer You can set the receive buffer of the TM-T88IV to 4KB or 45 bytes with DIP switch 1-2 as with the TM-T88III. The buffer full condition and buffer full release condition of the TM-T88IV are the same as those of the TM-T88III. Memory Capacity The sizes of the download buffer and NV graphics data of the TM-T88IV are the same as those of the TM-T88III. The TM-T88IV does not have the NV user memory. 74