Epson TM-T88IV TM-T88IV Technical Reference Guide - Page 42
Selecting the BUSY Status, Printer BUSY condition and status of DIP switch 2-1
View all Epson TM-T88IV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Selecting the BUSY Status With DIP switch 2-1, you can select conditions for invoking a BUSY state as either of the following: • When the receive buffer is full • When the receive buffer is full or the printer is offline In either case above, the printer enters the BUSY state after power is turned on (including resetting with the interface), and when a self-test is being run. Printer BUSY condition and status of DIP switch 2-1 Printer status Offline During the period after power is turned on (including resetting with the interface) to when the printer is ready to receive data. During the self-test. When the cover is open. During paper feed with the FEED button. When the printer stops printing due to a paperend (when printer has run out of roll paper). When an error has occurred. When an error has occurred. DIP SW 2-1 ON OFF BUSY BUSY BUSY - - - - BUSY BUSY BUSY BUSY BUSY BUSY BUSY If DIP switch 2-1 is on, the printer will not become BUSY • When error has occurred • When the cover is open • When printing has stopped for a paper out • When paper is fed by the FEED button 42