Epson TM-T88IV TM-T88IV Technical Reference Guide - Page 52
a 10/100BASE-T cable, he 10/100BASE-T LAN co, or by press, or cl, o place.
View all Epson TM-T88IV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Connect a 10/100BASE-T cable to the 10/100BASE-T LAN connector by pressing firmly until the connector clicks into place. 10/100BASE-T LAN interface connector 016(146'.'%1//70+%#6+1075' -'+06'.'(10#05%*.755/ LED (Green) LED (Yellow) Switch Press down the switch for a while when the power is on to initialize to the factory settings. To use the LAN interface, the IP Address Setup Utility for UB-E02 is required. For detailed information about the setup methods, see the UB-E02 Technical Reference Guide. You can obtain the IP Address Setup Utility for UB-E02 and the UB-E02 Technical Reference Guide from one of the following URLs or ask your dealer: • For customers in North America, go to the following web site: http://www.epsonexpert.com/ • For customers in other countries, go to the following web site: http://www.epson-pos.com/ 52