Epson TM-T88IV TM-T88IV Technical Reference Guide - Page 40

For USB Interface

Get Epson TM-T88IV PDF manuals and user guides View all Epson TM-T88IV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

For USB Interface DIP switch bank 1 SW Function ON 1-1 1-2 1-3 ∼ 1-7 1-8 Auto line feed Receive buffer capacity Undefined Setting of USB power-saving function Always enabled 45 bytes - Disabled OFF Always disabled 4 KB - Factory setting OFF OFF OFF Enabled OFF DIP switch bank 2 SW 2-1 2-2 2-3 ∼ 2-4 2-5 2-6 ∼ 2-7 2-8 Function ON OFF Handshaking (BUSY condition) Receive buffer full • Offline • Receive buffer full Reserved (Do not change setting) Fixed to OFF S e l e c t s p r i n t d e n s i t y / L ow See "Selecting the Print Density (DIP Switch power consumption mode 2-3/2-4)" on page 41. Setting the release condition of the receive buffer BUSY state (This function is effective when DIP switch 1-2 is set to off.) Releases the BUSY state when the remaining capacity of the receive buffer reaches 138 bytes. Releases the BUSY state when the remaining capacity of the receive buffer reaches 256 bytes. Reserved (Do not change setting) Fixed to OFF Reserved (Do not change setting) Fixed to ON Factory setting OFF OFF OFF OFF OFF ON • For DIP switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 42. • Do not change the setting of DIP switches 2-2, 2-6, and 2-7. Otherwise, the printer may not operate normally. 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
40
For USB Interface
DIP switch bank 1
DIP switch bank 2
SW
Function
ON
OFF
Factory
setting
1-1
Auto line feed
Always enabled
Always disabled
OFF
1-2
Receive buffer capacity
45 bytes
4 KB
OFF
1-3
∼
1-7
Undefined
—
—
OFF
1-8
Setting of USB power-saving
function
Disabled
Enabled
OFF
SW
Function
ON
OFF
Factory
setting
2-1
Handshaking (BUSY condition)
Receive buffer full
•
Offline
•
Receive buffer full
OFF
2-2
Reserved (Do not change
setting)
Fixed to OFF
OFF
2-3
∼
2-4
Selects print density/Low
power consumption mode
See
"Selecting the Print Density (DIP Switch
2-3/2-4)" on page 41
.
OFF
2-5
Setting the release condition
of the receive buffer BUSY
state (This function is effective
when DIP switch 1-2 is set to
off.)
Releases the BUSY
state when the
remaining capacity
of
the
receive
buffer reaches 138
bytes.
Releases the BUSY
state when the
remaining capacity
of
the
receive
buffer reaches 256
bytes.
OFF
2-6
∼
2-7
Reserved (Do not change
setting)
Fixed to OFF
OFF
2-8
Reserved (Do not change
setting)
Fixed to ON
ON
•
For DIP switch 2-1 (BUSY condition), see also
"Selecting the BUSY Status" on page 42
.
•
Do not change the setting of DIP switches 2-2, 2-6, and 2-7. Otherwise, the printer may
not operate normally.