Epson TM-T88IV TM-T88IV Technical Reference Guide - Page 41
Selecting the Print Density (DIP Switch 2-3/2-4), Function, SW 2-3, SW2-4
View all Epson TM-T88IV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 2 Setup Selecting the Print Density (DIP Switch 2-3/2-4) Function Low power consumption mode Print density (Standard) Print density (Darker than standard) Print density (Dark) SW 2-3 ON OFF ON OFF SW2-4 ON OFF OFF ON • If the print density is set to "Darker than standard" or "Dark" level, printing speed may be reduced. • The print density can be set with DIP switches (2-3/2-4) or to the customized value. (See "Setting the Memory Switches" on page 43.) The initial setting of the customized value is "Depends on the DIP switch settings." If the customized value is changed, the value set with the customized value is enabled. 2 41
Chapter 2
Setup
41
2
Selecting the Print Density (DIP Switch 2-3/2-4)
Function
SW 2-3
SW2-4
Low power consumption mode
ON
ON
Print density (Standard)
OFF
OFF
Print density (Darker than standard)
ON
OFF
Print density (Dark)
OFF
ON
•
If the print density is set to “Darker than standard” or ”Dark” level, printing speed may be
reduced.
•
The print density can be set with DIP switches (2-3/2-4) or to the customized value. (See
"Setting the Memory Switches" on page 43
.) The initial setting of the customized value is
“Depends on the DIP switch settings.” If the customized value is changed, the value set
with the customized value is enabled.