Epson TM-T20II Technical Reference Guide - Page 79
Then hold down the Feed button until the printer starts printing the set, ting condition.
View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 3 Application Development Information 4 Press the Feed button three times, and then hold down the Feed button until the printer starts printing the setting instructions. Customize Value Settings Modes 0 : Exit 1 : Print Current Settings 2 : Print Density 3 : Printing Speed 4 : Serial Interface Settings 5 : Auto Paper Feed&Cut at cover close 6 : Paper Width 8 : Default Character 9 : Embedded Font Replacement 10 : USB Interface Settings 11 : Buzzer Control 12 : Column Emulation 13 : Interface Settings 15 : Logo Emulation 16 : Automatic Paper Reduction 17 : Interface Selection 18 : Power Supply Unit Capacity Select Modes by executing following procedure. 3 step 1. Press the Feed button less than 1 second as many times as the selected mode number. step 2. Press Feed button for 1 second or more. 5 Select the setting item by pressing the Feed button (no longer than 1 second) for the number of times indicated on the print. Then hold down the Feed button until the printer starts printing the setting condition. 6 Select the setting condition by pressing the Feed button (no longer than 1 second) for the number of times indicated on the print. Then hold down the Feed button until the printer starts printing the setting result. When one setting has been completed, the printer stores the setting. See "Setting Conditions for Software Setting Mode" on page 94 for the selectable items. 79