Epson TM-T20II Technical Reference Guide - Page 48
Paper width, Print density, Print speed, Character code table default, initi, tting
View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Paper width • 80 mm (initial setting) • 58 mm To change the paper width, you need to install the 58-mm width paper guide plate. For information about how to change the paper width, see "Changing the Paper Width" on page 37. Print density Selectable from levels 1 to 7 (85% 115%). Initial setting: level 4 (100%) Depending on the paper type, it is recommended to set the print density as shown in the table below for the best print quality. Original Paper type Density Level TF50KS-E, TF60KS-E, PD150R, PD160R, PD190R, 4 (100%) P220AGB-1, P350, AF50KS-E, KT55F20, KT48F20 F5041 5 (105%) When the print density level is increased, printing speed may be reduced. Print speed Selectable from levels 1 to 13 (Slow Fast) Initial setting: level 13 Depending on print conditions, such as print duty, print head temperature, and data transmission speed, print speed is automatically adjusted, which may cause white lines due to intermittent print (the motor sometimes stops). To avoid this, keep the print speed constant by setting it lower, or set the transmission speed higher for the serial interface. Character code table default Selectable from 43 pages including user defined page Initial setting: Page 0 (PC437: USA, Standard Europe) For the character code table, see "Character Code Tables" on page 97. 48