Epson TM-T20II Technical Reference Guide - Page 49
International character default, Interface selection, Power supply unit capacity, Number of columns
View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 2 Setup International character default Selectable from 18 sets Initial setting: USA Interface selection • UIB • Ethernet • Built-in USB • Auto* (initial setting) *: The interface to which data is transmitted first is selected. Once the interface is selected, the selection is enabled until the power is turned off or the printer is reset. This setting is valid for models with UIB and built-in USB. Available settings may deffer depending on the model. For the model which USB Type B connector is covered with a plate, you need to select 2 [Built-in USB] in order to use the USB interface. Power supply unit capacity Selectable from levels 1 to 3 (Low High) Initial setting: level 3 Number of columns • Standard mode (initial setting) • 42 column mode Autocutting after closing cover • Cuts (initial setting) • Does not cut Paper reduction Extra upper space reduction • Disabled (initial setting) • Enabled 49