Epson TM-T20II Technical Reference Guide - Page 56
Connecting the Buzzer Unit, Clean and dry the printer case where the buzzer unit will be installed.
View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Connecting the Buzzer Unit The buzzer unit is recommended to be installed in the following positions. • When using the printer horizontally: either side • When using the printer vertically: side or top • When using the printer on the wall: side, top, or bottom Horizontal installation Vertical/Wall-hanging installation Do not install the buzzer unit at the roll paper exit. To prevent liquid from entering inside, it is recommended to install the buzzer unit so that the volume adjustment knob is positioned sideways or downward. 1 Turn off the printer. 2 Clean and dry the printer case where the buzzer unit will be installed. 3 With 2 included pieces of the affixing tape combined, peel off the backing paper on one side, and stick the tape in the center of the attaching surface of the buzzer unit. Affixing tape 56