Epson LS100 Users Guide - Page 75
Direct Power On, Warning, Caution, especially dangerous for children and pets.
View all Epson LS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. The projector's On/Standby light turns blue. This indicates that the projector is receiving power. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 3. Press the power button on the projector or remote control to turn on the projector. The projector beeps and the Status light flashes blue as the projector warms up. After about 30 seconds, the Status light stops flashing and turns blue. Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is especially dangerous for children and pets. Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the lens for an extended time can melt and light that is reflected back into the lens can cause the projector to malfunction. 75