Epson LS100 Users Guide - Page 179

Related references Projector Setup Settings - ECO Menu Related tasks Shutting Off the Picture and Sound Temporarily Solving Projector or Remote Control Operation Problems Check the solutions in these sections if you have problems operating the projector or remote control. Solutions to Projector Power or Shut-Off Problems Solutions to Problems with the Remote Control Solutions to Password Problems Parent topic: Solving Problems Solutions to Projector Power or Shut-Off Problems If the projector does not come on when you press the power button or it shuts off unexpectedly, try the following solutions: • Make sure the power cord is securely connected to the projector and to a working electrical outlet. • The projector's buttons may be locked for security. Unlock the buttons or use the remote control to turn on the projector. • If the projector's laser shuts off unexpectedly, it may have entered standby mode after a period of inactivity. Press the power button to wake the projector and adjust the Sleep Mode Timer setting to change the sleep interval. The A/V Mute Timer may be set. Set the A/V Mute Timer to Off in the ECO menu. • If the projector's laser shuts off, the Status light is flashing, and the Temp light is on, the projector has overheated and shut off. Check the solutions for this light status. • If the power button on the remote control does not turn on the projector, check its batteries and make sure the Remote Receiver setting is turned on in the projector's menu, if available. • Make sure Sleep Mode is not in effect. • The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord and contact Epson. • Temporarily remove the Ethernet cable and see if the problem continues. Parent topic: Solving Projector or Remote Control Operation Problems 179