Epson LS100 Users Guide - Page 70
Crestron RoomView Support, Others, Enter, Priority Gateway, AMX Device Discovery, Crestron RoomView
View all Epson LS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
7. Select the Others menu and press Enter. 8. If available, select the Priority Gateway setting for your network. 9. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to allow the projector to be detected. 10. If your network environment uses a Crestron RoomView controller, turn on the Crestron RoomView setting to allow the projector to be detected. 11. If you are using the projector with a Control 4 Simple Device Discovery Protocol (SDDP) automation system, turn on the Control4 SDDP setting. 12. If you want this projector to receive broadcast messages over the network, turn on the Message Broadcasting setting. Administrators can broadcast messages over the network using the Epson Projector Management software. 13. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Using the Projector on a Network Crestron RoomView Support If you are using the Crestron RoomView network monitoring and control system, you can set up your projector for use on the system. Crestron RoomView lets you control and monitor your projector using a web browser. 70