Epson LS100 Users Guide - Page 64

Setting Security Passphrase Channel IP Settings SSID Display IP Address Display Options Open WPA2-PSK WPA/WPA2-PSK Various passphrases from 8 to 32 characters (from a web browser, the maximum is 63 characters) 1ch 6ch 11ch DHCP (On or Off) IP Address Subnet Mask Gateway Address On Off On Off Description Selects the type of security used on the wireless network WPA2-PSK: uses WPA2 security with AES for encryption. Use the Passphrase value to establish a connection from a computer WPA/WPA2-PSK: uses WPA personal mode; encryption is dependent on the access point settings; Passphrase must be the same as the access point Selects the pre-shared key used on the network; passphrases are case-sensitive. If the network settings are reset after the passphrase has been changed more than once, the first passphrase is restored. In Quick connection mode, selects the frequency band (channel) used by the wireless LAN Selects DHCP if your network assigns IP addresses automatically, or turns off DHCP so you can enter the network's IP address, subnet mask, and gateway address as needed Selects whether to display the SSID on the network standby screen and Home screen Selects whether to display the IP address on the network standby screen and Home screen Parent topic: Selecting Wireless Network Settings Manually 64