Epson LS100 Users Guide - Page 168

On/Standby light Blue Status light Laser light Temp light Flashing blue Off Off Blue Off Flashing blue Off Flashing blue Varies Off Off Off Off Varies Flashing orange Off Flashing blue Off Orange Flashing blue Varies Flashing orange Varies Status and solution Warming up. Wait for an image to appear. Shutting down. (When the Status light stops flashing, you can unplug the projector.) Standby, sleep mode, or monitoring. Preparing for monitoring or quick startup mode; all features are disabled. Projector is too hot. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • Make sure the environmental temperature is not too hot. Projector has overheated and turned off. Leave it turned off to cool down. After about five minutes, do the following: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Laser warning. Turn the projector off, unplug it, and contact Epson for help. 168