Epic Fitness A17r Bike User Manual - Page 9

Orient the Upright 4 and the Upright Sleeve

Get Epic Fitness A17r Bike PDF manuals and user guides View all Epic Fitness A17r Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

8. Orient the Upright (4) and the Upright Sleeve (37) as shown. Slide the Upright Sleeve onto the 8 Upright. Have another person hold the Upright (4) and the Upright Sleeve (37) near the front of the Frame (1) as shown. Tie the lower end of the wire tie in the Upright (4) to the Main Wire Harness (58) and to the Pulse Wire (64) in the Frame (1). See the inset drawing. Pull the other end of the wire tie until the Main Wire Harness (58) and the Pulse Wire (64) are routed through the Upright (4) and out of the indicated hole. 4 Wire Tie 58 64 37 Wire Tie 1 4 Hole 64 58 Wire Tie 9. Tip: Avoid pinching the wires. Slide the Upright (4) onto the Frame (1). Attach the Upright with five M10 x 25mm Screws (74); start all five Screws, and then tighten them. Then, slide the Upright Sleeve (37) downward and press it onto the Right and Left Shields (10, 11). 9 Avoid pinching the wires 4 37 74 10, 11 74 1 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
9
8
4
1
58
64
37
8.
Orient the Upright (4) and the Upright Sleeve
(37) as shown. Slide the Upright Sleeve onto the
Upright.
Have another person hold the Upright (4) and
the Upright Sleeve (37) near the front of the
Frame (1) as shown.
Tie the lower end of the wire tie in the Upright (4)
to the Main Wire Harness (58) and to the Pulse
Wire (64) in the Frame (1).
See the inset drawing.
Pull the other end of the
wire tie until the Main Wire Harness (58) and the
Pulse Wire (64) are routed through the Upright
(4) and out of the indicated hole.
9
9.
Tip: Avoid pinching the wires.
Slide the Upright (4) onto the Frame (1). Attach
the Upright with five M10 x 25mm Screws (74);
start all five Screws, and then tighten them.
Then, slide the Upright Sleeve (37) downward
and press it onto the Right and Left Shields
(10, 11).
4
1
74
74
10, 11
37
Avoid pinching
the wires
Wire Tie
Wire Tie
4
Hole
58
64
Wire Tie