Epic Fitness A17r Bike User Manual - Page 23

HOW TO CHANGE CONSOLE SETTINGS The console features a settings mode that allows you to view usage information, to personalize console settings, and to set up and manage a wireless network connection. 1. Select the settings mode. To select the settings mode, press and hold down the Calorie button until the settings mode appears in the display. The time display will show the total number of hours that the exercise bike has been used. The distance display will show the total number of miles (or kilometers) that have been pedaled on the exercise bike. 2. Navigate the settings mode menu. The matrix will display a menu of the settings mode options. Press the increase and decrease buttons near the Enter button to highlight the desired option. The lower part of the matrix will display instructions for the highlighted option. Make sure to follow the instructions displayed in the lower part of the matrix. 3. Change settings as desired. Demo—-The console features a display demo mode, designed to be used if the exercise bike is displayed in a store. While the demo mode is turned on, the display will not enter sleep mode when the exercise bike is not in use. If the demo mode is turned on, the word ON will appear in the matrix. To turn on or turn off the demo mode, press the Enter button. Units—-The selected unit of measurement will appear in the matrix. To change the unit of measurement, press the Enter button. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. Contrast—-The contrast level of the display will appear in the matrix. Press the Quick Resistance increase and decrease buttons to adjust the contrast level. Firmware Update—-For the best results, regularly check for firmware updates. Note: The matrix will display NOT CONNECTED if the console is not connected to a wireless network. Press the Enter button to check for firmware updates using your wireless network. If an update is available, the update will begin automatically. IMPORTANT: To avoid damaging the exercise bike, do not unplug the power adapter while the firmware is being updated. The update may take several minutes. Note: Occasionally, a firmware update may cause your console to function slightly differently. These updates are always designed to improve your exercise experience. Default Settings—-To restore the console to its factory default settings, press the Enter button. Note: The console will erase any information that you have saved in its memory. IP Address—-An IP address will appear in the matrix. Note: This IP address is for reference. The WiFi–-Normal option will allow you to set up a wireless network connection using the console. See step 4 for instructions. The WiFi–-WPS option will allow you to set up a wireless network connection using your WPS router. See step 5 for instructions. The WiFi–-Advanced option will allow you to set up a wireless network connection using your computer, smart phone, tablet, or other Wi-Fi device. See step 6 for instructions. 23