Epic Fitness A17r Bike User Manual - Page 24

iFit User Setup—-To set up a different iFit Live account, but maintain the existing wireless connection, follow the instructions in the matrix. Note: This option will be used rarely. Clear WiFi—-To erase the console’'s wireless network settings and have it forget the currently selected wireless network, follow the instructions in the matrix. 4. Use WiFi–-Normal to set up a wireless connection. Press the up, down, left, and right buttons to highlight the desired letter or number. Then, press the Enter button to select the letter, number, or symbol. When you have finished entering the password, press the Done button. Next, a numerical code and a web address will appear in the matrix. Open a web browser on your computer, smart phone, tablet, or other internet-compatible device and go to the web address. This option will allow you to set up a wireless network connection using the console. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password. To set up a wireless network connection using the console, first press the Enter button. Log in to your iFit Live account on the web page. Then, enter the numerical code into the indicated field on the web page. Follow any other instructions on the web page. Then, unplug the power adapter, wait for several seconds, and then plug in the power adapter again. Note: It may take a few minutes for the console to be ready for use. IMPORTANT: Set the included WiFi setup card on the console. The buttons on the WiFi setup card are referenced in the following instructions. Card When the console is connected to a wireless network, the wireless symbol in the display will stop flashing and become solid. The wireless symbol will show the strength of your wireless signal; four arcs indicate full signal strength. If you cannot complete any part of this process, or if you have any questions, go to http://support.ifit.com for assistance. 5. Use WiFi–-WPS to set up a wireless connection. A list of networks will appear in the matrix. Press the up and down buttons to highlight the desired network. Then, press the Enter button. Note: Do not select IFIT_SETUP. Note: The time display will show the number of the currently-selected access point. The distance display will show the total number of access points detected. If the network has a password, enter the password. This option will allow you to set up a wireless network connection using your WPS router. To set up a wireless network connection using your WPS router, first press the Enter button and follow the instructions in the matrix. A numerical code and a web address will appear in the matrix. Open a web browser on your computer, smart phone, tablet, or other internet-compatible device and go to the web address. A keyboard will appear in the matrix. As necessary, press the buttons on the WiFi setup card to select the caps option, the number option, or the symbol option. Log in to your iFit Live account on the web page. Then, enter the numerical code into the indicated field on the web page. Follow any other instructions on the web page. 24