Dell Latitude 5490 Owners Manual - Page 43

Installing display hinge cover, Display assembly, Removing display assembly

Get Dell Latitude 5490 PDF manuals and user guides View all Dell Latitude 5490 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Installing display hinge cover 1 Place the display hinge cover on the display hinge. 2 Replace the M2x3 screw to secure the display hinge cover to the display hinge. 3 Repeat step 1 and step 2 to install the other display hinge cover. 4 Install the: a battery b base cover 5 Follow the procedure in After working inside your computer. Display assembly Removing display assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the: a base cover b battery c WLAN card d WWAN card (optional) e display hinge cover 3 To disconnect the display cable: a Release the WLAN and WWAN cables from the routing channels [1]. b Remove the two (M2x3) screws that secure the display cable bracket in place [2]. c Remove the display cable bracket that secures the display cable from the system [3]. d Disconnect the display cables from their respective connectors on the system board [4,5]. e Remove the single screw that secure the power connector bracket and also the display cable to the system [6]. Removing and installing components 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Installing display hinge cover
1
Place the display hinge cover on the display hinge.
2
Replace the M2x3 screw to secure the display hinge cover to the display hinge.
3
Repeat step 1 and step 2 to install the other display hinge cover.
4
Install the:
a
battery
b
base cover
5
Follow the procedure in
After working inside your computer
.
Display assembly
Removing display assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
base cover
b
battery
c
WLAN card
d
WWAN card (optional)
e
display hinge cover
3
To disconnect the display cable:
a
Release the WLAN and WWAN cables from the routing channels [1].
b
Remove the two (M2x3) screws that secure the display cable bracket in place [2].
c
Remove the display cable bracket that secures the display cable from the system [3].
d
Disconnect the display cables from their respective connectors on the system board [4,5].
e
Remove the single screw that secure the power connector bracket and also the display cable to the system [6].
Removing and installing components
43