Dell Latitude 5490 Owners Manual - Page 17
Installing the SSD card, Removing the SSD frame
View all Dell Latitude 5490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installing the SSD card NOTE: The following procedure applies for SATA M.2 2280 and PCIe M.2 2280 1 Insert the SSD card into the connector on the system. 2 Replace the M2*3 screw that secures the SSD card to the system. 3 Place the Mylar shield over the SSD. 4 Install the : a battery b base cover 5 Follow the procedure in After working inside your computer. Removing the SSD frame 1 Follow the procedure in Before working inside your computer. 2 Remove the: a base cover b battery c SSD card 3 To remove the SSD frame: a Remove the M2x3 screw that secures the SSD frame to the system [1]. b Lift the SSD frame from the system [2]. Removing and installing components 17
Installing the SSD card
NOTE:
The following procedure applies for SATA M.2 2280 and PCIe M.2 2280
1
Insert the SSD card into the connector on the system.
2
Replace the M2*3 screw that secures the SSD card to the system.
3
Place the Mylar shield over the SSD.
4
Install the :
a
battery
b
base cover
5
Follow the procedure in
After working inside your computer
.
Removing the SSD frame
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
base cover
b
battery
c
SSD card
3
To remove the SSD frame:
a
Remove the M2x3 screw that secures the SSD frame to the system [1].
b
Lift the SSD frame from the system [2].
Removing and installing components
17