Dell Latitude 5490 Owners Manual - Page 30
Installing the heat sink, System fan, Removing the system fan
View all Dell Latitude 5490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installing the heat sink NOTE: This procedure is only for the UMA model. 1 Place the heat sink on the system board. 2 Replace the four (M2x3) screws that secure the heat sink on the system board. NOTE: • Replace the heat sink screws in sequential order as indicated on the heat-sink. 3 Install the : a battery b base cover 4 Follow the procedure in After working inside your computer. System fan Removing the system fan NOTE: This procedure is only for the UMA model 1 Follow the procedure in Before working inside your computer. 2 Remove the: a base cover b battery c hard drive d SSD card e SSD frame 30 Removing and installing components
Installing the heat sink
NOTE:
This procedure is only for the UMA model.
1
Place the heat sink on the system board.
2
Replace the four (M2x3) screws that secure the heat sink on the system board.
NOTE:
•
Replace the heat sink screws in sequential order as indicated on the heat-sink.
3
Install the :
a
battery
b
base cover
4
Follow the procedure in
After working inside your computer
.
System fan
Removing the system fan
NOTE:
This procedure is only for the UMA model
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
base cover
b
battery
c
hard drive
d
SSD card
e
SSD frame
30
Removing and installing components