Dell Latitude 5490 Owners Manual - Page 18

Installing the SSD frame, Hard drive, Removing hard drive

Get Dell Latitude 5490 PDF manuals and user guides View all Dell Latitude 5490 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Installing the SSD frame 1 Place the SSD frame into the slot in the system. 2 Replace the M2x3 screw that secures the SSD frame to the system. 3 Install the: a SSD card b battery c base cover 4 Follow the procedure in After working inside your computer. Hard drive Removing hard drive 1 Follow the procedure in Before working inside your computer. 2 Remove the : a base cover b battery 3 To remove the hard drive: a Disconnect the hard drive cable from the connector on the system board [1]. b Remove the four (M2 x 2.7) screws that secure the hard drive to the system [2]. c Lift the hard drive from the system. 18 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Installing the SSD frame
1
Place the SSD frame into the slot in the system.
2
Replace the M2x3 screw that secures the SSD frame to the system.
3
Install the:
a
SSD card
b
battery
c
base cover
4
Follow the procedure in
After working inside your computer
.
Hard drive
Removing hard drive
1
Follow the procedure in
Before working inside your computer
.
2
Remove the :
a
base cover
b
battery
3
To remove the hard drive:
a
Disconnect the hard drive cable from the connector on the system board [1].
b
Remove the four (M2 x 2.7) screws that secure the hard drive to the system [2].
c
Lift the hard drive from the system.
18
Removing and installing components