Dell Latitude 5490 Owners Manual - Page 41

Installing system board

Page 41 highlights

Installing system board 1 Align the system board with the screw holders on the computer. 2 Replace the four (M2x3) screws to secure the system board to the system. 3 Place the metal bracket to secure the DisplayPort over USB Type-C. 4 Replace the two (M2x3) screws to secure the metal bracket on the DisplayPort over USB Type-C. 5 Connect the power connector port cable to the connector on the system board. 6 Connect the display cables to the connectors on the system board. 7 Place the display cable metal bracket over the display cable. 8 Replace the two M2x3 screws to secure the metal bracket. 9 Flip over the system and open the system in working mode. 10 Connect the following cables: a Touchpad cable b LED board cable c USH board cable d speaker cable 11 Install the: a system fan b chassis frame c heat sink d keyboard e keyboard lattice f WWAN card (optional) g WLAN card Removing and installing components 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95

Installing system board
1
Align the system board with the screw holders on the computer.
2
Replace the four (M2x3) screws to secure the system board to the system.
3
Place the metal bracket to secure the DisplayPort over USB Type-C.
4
Replace the two (M2x3) screws to secure the metal bracket on the DisplayPort over USB Type-C.
5
Connect the power connector port cable to the connector on the system board.
6
Connect the display cables to the connectors on the system board.
7
Place the display cable metal bracket over the display cable.
8
Replace the two M2x3 screws to secure the metal bracket.
9
Flip over the system and open the system in working mode.
10
Connect the following cables:
a
Touchpad cable
b
LED board cable
c
USH board cable
d
speaker cable
11
Install the:
a
system fan
b
chassis frame
c
heat sink
d
keyboard
e
keyboard lattice
f
WWAN card (optional)
g
WLAN card
Removing and installing components
41