Dell Latitude 5490 Owners Manual - Page 15
Removing the battery, Installing the battery
View all Dell Latitude 5490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Removing the battery 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 To remove the battery: a Disconnect the battery cable from the connector on the system board [1] and unroute the cable from the routing channel. b Loosen the M2x6 captive screw that secures the battery to the system [2]. c Lift the battery away from the system [3]. Installing the battery 1 Insert the battery into the slot on the system. 2 Route the battery cable through the routing channel. 3 Tighten the M2x6 captive screw to secure the battery to the system. 4 Connect the battery cable to the connector on the system board. 5 Install the base cover. 6 Follow the procedure in After working inside your computer. Removing and installing components 15