Dell Latitude 5490 Owners Manual - Page 34
Installing the chassis frame
View all Dell Latitude 5490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4 To remove the chassis frame: a Remove the five (M2x3) screws and eight (M2x5) screws that secure the chassis frame to the system [1]. b Lift the chassis frame from the system [2]. Installing the chassis frame 1 Place the chassis frame into the slot on the system. NOTE: Gently pull the keyboard cable and keyboard back light cables through the spacing in the chassis frame before placing the chassis frame in the slot on the system. 2 Replace the five (M2x3) screws and eight (M2x5) screws to secure the chassis frame to the system. 3 Connect the keyboard cable and the keyboard backlight cable to their connectors on the system. NOTE: There may be more than one cable to connect based on keyboard types. 4 Route the WLAN cables through the routing channels. 5 Install the: a WWAN card (optional) b WLAN card c SSD frame d SSD card e hard drive f battery g base cover 6 Follow the procedure in After working inside your system. 34 Removing and installing components