DeLonghi ESAM6620 Owner Manual - Page 18
Heating Water, Cleaning - service manual
View all DeLonghi ESAM6620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
delivering milk. 4. Once the required quantity of milk has been delivered into the cup, press the CAPPUCCINO button again. 5. After a few seconds, the appliance starts delivering coffee into the cup and the message "COFFEE FOR CAPPUCCINO PROGRAM QUANTITY" is displayed. 6. Once the required quantity of coffee has been delivered into the cup, press the CAPPUCCINO button again. Coffee delivery stops and "ready" appears on the display. The machine is now reprogrammed with the new quantities. The quantities of coffee and milk for macchiato and caffelatte can also be programmed. HEATING WATER Preparation displayed. 3. When the hot water in the cup reaches the required level, press the button again. The machine is now reprogrammed with the new quantity. CLEANING Cleaning the coffee maker The following parts of the machine must be cleaned regularly: - coffee grounds container (A17), - drip tray (A15), - water tank (A12), - coffee spouts (A19) and hot water nozzle (A10), - pre-ground coffee funnel (A8), - inside the machine, accessible after opening the service door (A18), - infuser (A11), - milk container (B) Important! Danger of burns. Never leave the machine unsupervised while Important! • Do not use solvents, abrasive detergents delivering hot water. or alcohol to clean the coffee maker. With The hot water spout becomes hot while water is De'Longhi superautomatic coffee makers, being delivered and must be held by the handle you need not use chemical products to clean only. the machine. The descaler recommended 1. Make sure the hot water spout (B7) is attached correctly (fig. 4). by De'Longhi is made from natural and completely biodegradable substances. • None of the components of the appliance can 2. Place a container under the spout (as close be washed in a dishwasher with the exception as possible to avoid splashes). of the milk container (B). 3. Press the button (fig. 2). The message • Do not use metal objects to remove "HOT WATER..." is displayed. encrustations or coffee deposits as they 4. Water flows out of the spout. Delivery stops could scratch metal or plastic surfaces. automatically after 250 ml. 5. To interrupt delivery of hot water manually, press the button again. Cleaning the coffee grounds container When "EMPTY GROUNDS CONTAINER!" is displayed, the grounds container must be Important: emptied and cleaned. You should not deliver hot water for more than 2 Until the grounds container has been cleaned, minutes at a time. the appliance continues to display the message Changing the quantity The appliance is set by default to automatically deliver 250 ml. To modify these quantities, proceed as follows: 1. Position a container under the spouts. 2. Press the button until the message "HOT WATER PROGRAM QUANTITY" is and coffee cannot be made. Even if not full, the empty grounds container message is displayed 72 hours after the last coffee has been prepared. For the 72 hours to be calculated correctly, the machine must never be turned off with the main switch in the 0 position. 16