DeLonghi ESAM6620 Owner Manual - Page 15

ESC symbol flashing on the display) to exit programming mode or to change other parameters. The appliance is now reset to the default settings and the "READY" message is displayed. Beep ON/OFF (activates and deactivates the beep) • Press the P button, then press the button (corresponding to the symbol flashing on the display) repeatedly until the menu arrow is on "BEEP ON". • Press the button (corresponding to the SET symbol flashing on the display) and the appliance will display "BEEP OFF" • Press the OK button to turn the beep off; • Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode or to change other parameters. • The appliance is now set not to emit any Beep and displays the message "READY". MAKING COFFEE Selecting the coffee taste The appliance is preset to make coffee with a standard taste. You can choose between 5 different coffee tastes: • Extra-mild taste • Mild taste • Standard taste • Strong taste • Extra-strong taste To change the taste, press the button (fig. 2) repeatedly until the required taste is displayed. Selecting the quantity of coffee in the cup The appliance is set by default to automatically make the following quantities of coffee: - short coffee when the button is pressed; - long coffee when the button is pressed; - two short coffees when the button is pressed; - two long coffees when the button is pressed. To change the quantity of coffee the appliance delivers automatically into the cup, proceed as described below. - press the button corresponding to the quantity you want to change for at least 8 seconds until the message "PROGRAM QUANTITY" is displayed and coffee delivery commences; - when the coffee in the cup reaches the required level, press the same button again to memorise the new amount. This is confirmed by two beeps. The appliance is now reprogrammed with the new settings and the message "READY" is displayed. Please note: all four coffee buttons can be customised. Adjusting the coffee grinder The coffee grinder is preset in the factory to make coffee correctly and should not require adjusting initially. However, if after making the first few coffees you find that delivery is either too fast or too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment knob (fig. 7). Important! The grinding adjustment knob must only be turned when the coffee grinder is in operation. For slower coffee delivery and a creamier coffee, turn one click towards "1" (finer pre-ground coffee). For faster delivery (not a drop at a time), turn one click towards the "7" (coarser ground coffee). These adjustments will only be evident after at least 2 cups of coffee have been delivered. If delivery is still too fast or too slow, repeat the correction procedure. Manual rinsing For a hotter coffee, before delivery rinse the appliance through by pressing the : button. Hot water flows out of the coffee spouts and heats the internal circuit of the machine so that the coffee delivered will be hotter. 13