DeLonghi ESAM6620 Owner Manual - Page 14

Please note: to display the time with the appliance off, press any button. The time will be displayed for 5 seconds. Setting auto-start time You can set the auto-start time in order to have the appliance ready at a certain time (for example in the morning) so you can make coffee immediately. • Make sure the clock on the appliance has been set as described in the previous section. • Press the P button, then press the button (corresponding to the symbol flashing on the display) repeatedly until the menu arrow is on "START". • Press the button (corresponding to the SET symbol flashing on the display) to set the auto-start time. (If you hold the SET button down, the time changes rapidly). • Press the OK button to confirm. Activating auto-start • Press the SET button again and "AUTO- START NO" is displayed. • Press the button (corresponding to the SET symbol flashing on the display) to modify the function (the appliance displays AUTO-START YES); • Press the OK button to activate auto-start; • Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode or to change other parameters. Please note: When the auto-start time is set, the symbol appears alongside the time on the display. Descale For instructions on descaling, see page 18. Setting the temperature To modify the temperature (low, medium, high) of the water used to make the coffee, proceed as follows: • Press the P button, then press the button (corresponding to the symbol flashing on the display) repeatedly until the menu arrow is on "TEMPERATURE". • Press the button (corresponding to the SET symbol flashing on the display) until the appliance displays the required coffee temperature (low, medium, high); • Press the OK button to confirm the temperature selected; • Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode or to change other parameters. Auto-Off The appliance is set to switch automatically to stand-by if not used for 3 hours. The time can be changed so that the appliance switches off after 1, 2 or 3 hours. • Press the P button, then press the button (corresponding to the symbol flashing on the display) repeatedly until the menu arrow is on "OFF AFTER 3 HOURS". • Press the button (corresponding to the SET symbol flashing on the display) to change the number of hours the appliance remains on. • Press the OK button to confirm. • Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode or to change other parameters. Setting water hardness For instructions on setting water hardness, see 37. Default values (reset) This resets all menu settings and programmed quantities back to the default values (with the exception of the language which remains as set). • Press the P button, then press the button (corresponding to the symbol flashing on the display) repeatedly until the menu arrow is on "default values No" • Press the button (corresponding to the SET symbol flashing on the display) and the appliance will display "default values Yes"; • Press the OK button to reset the default values; • Press the P button (corresponding to the 12