DeLonghi ESAM6620 Owner Manual - Page 17

To use particularly tall cups/glasses, raise the lid of the special compartment in the cup tray (fig. 19). Please note: If during delivery you want to stop making milk or coffee, press the LATTE button. Making cappuccino 1. After attaching the milk container, position the froth regulator on 2 printed on the milk container lid (fig. 20). The quality of froth can be adjusted during delivery by moving the pointer slightly towards 1 for a denser froth. Moving it towards 2 obtains a less dense froth. 2. Press the CAPPUCCINO button (fig. 21). The message "cappuccino FROTH REGULATOR IN POSITION 2" appears. (After a few seconds, frothed milk flows out of the milk spout into the cup below. Milk delivery stops automatically and coffee delivery begins). Please note: If during delivery you want to stop making milk or coffee, press the CAPPUCCINO button. Making Italian macchiato 1. After attaching the milk container, position the froth regulator (B1) on 2 (fig. 20) printed on the milk container lid. 2. Press the ITALIAN MACCHIATO button (fig. 22). The message "ITALIAN MACCHIATO FROTH REGULATOR IN POSITION 2" appears. After a few seconds, frothed milk flows out of the milk spout into the cup below. Milk delivery stops automatically and coffee delivery begins. Please note: If during delivery you want to stop making milk or coffee, press the ITALIAN MACCHIATO button. Making latte 1. After attaching the milk container, position the froth regulator on pos. 1 (fig. 23) printed on the milk container lid. 2. Press the LATTE button (fig. 24). The message "LATTE FROTH REGULATOR IN POSITION 1" appears. After a few seconds, milk is delivered from the milk spout into the cup below. Milk delivery stops automatically and coffee delivery begins. Making frothed milk and hot milk (WITHOUT COFFEE) 1. After attaching the milk container, position the froth regulator (B1) according to the quantity of froth you require (pos. 1 = little froth; pos. 2 = abundant froth). 2. Press the CAPPUCCINO, ITALIAN MACCHIATO or LATTE button twice (within 2 seconds). Cleaning the milk container after use Important: Danger of burns When cleaning the internal tubes of the milk container, a little hot water leaks out of the frothed milk tube (B5). Avoid contact with splashes of water. When "PRESS CLEAN" flashes on the display (each time you use a milk function): 1. Leave the milk container in the machine (you do not need to empty it); 2. Place a cup or other recipient under the frothed milk spout. 3. Press the "CLEAN" button (fig. 25) and hold it down for at least 8 seconds. The message "CLEANING..." is displayed. 4. Remove the milk container and always clean the nozzle with a sponge (fig. 26). Please note: • The milk left in the jug can be kept in the refrigerator. The milk should not be left out of the refrigerator for more than 15 minutes. Programming the quantities of coffee and milk in the cup The appliance is set by default to deliver standard quantities. To change these quantities, proceed as follows: 1. Place a cup under the coffee spouts and milk spout. 2. Press and hold the CAPPUCCINO button (fig. 21) until the message "MILK FOR CAPPUCCINO PROGRAM QUANTITY" is displayed. 3. Release the button. The appliance starts 15