Brother International QL-810W Users Guide - Page 56
Wired LAN (QL-820NWB only) / Wireless LAN Tabs, TCP/IP Wired/Wireless, Wireless Settings
View all Brother International QL-810W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Changing the Label Printer Settings Wired LAN (QL-820NWB only) / Wireless LAN Tabs 4 The following explains about the Wired LAN (QL-820NWB only) and Wireless Tab in the settings dialog box. TCP/IP (Wired/Wireless) • Boot Method Selects [AUTO], [BOOTP], [DHCP], [RARP], or [STATIC]. • IP Address/Subnet Mask/Gateway Specifies the various networking values. You can enter these settings only when the IP address is set to [STATIC]. • DNS Server Method Selects [AUTO] or [STATIC]. • Primary DNS Server IP Address/Secondary DNS Server IP Address You can enter these settings only when the DNS server is set to [STATIC]. 4 4 IPv6 4 • Static IPv6 Address Specifies a permanent IPv6 address. • Enable this address Enables the specified static IPv6 address. • Primary DNS Server IPv6 Address/Secondary DNS Server IPv6 Address Specifies the DNS server IPv6 addresses. • IPv6 Address List Displays the list of IPv6 addresses. Wireless Settings 4 • Communication Mode Selects [Infrastructure] or [Ad-hoc]. • SSID (Network Name) Clicking [Search] displays the available SSID selections in a separate dialog box. • Channel Lists available channels. Note This setting is valid only in Ad-Hoc mode. • Authentication Method/Encryption Mode The supported encryption modes for the authentication methods are as shown in Communication Modes and Authentication Methods/Encryption Modes on page 47. • WEP Key You can specify a setting only when WEP is selected as the encryption mode. • Passphrase You can specify a setting only when WPA/WPA2-PSK is selected as the authentication method. 46