Brother International QL-810W Users Guide - Page 37
WPS Wi-Fi Protected Setup™, For QL-810W - wps pin
View all Brother International QL-810W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Printing Using a Computer (P-touch Editor) c To use the computer or mobile device to select the SSID of the Label Printer, see step b of Wireless Direct on page 24. To configure the Infrastructure Mode settings of the Label Printer, see step c of Connecting the Label Printer to your Wi-Fi access point/router on page 25. 2 WPS (Wi-Fi Protected Setup™) 2 If your Wi-Fi access point/router supports WPS, settings and connections can be configured quickly. a First, confirm that your Wi-Fi access point/router has the WPS symbol. b Place the Label Printer within the range of your Wi-Fi access point/router. The range may differ depending on your environment. See the instructions provided with your Wi-Fi access point/router. c On the Label Printer: For QL-810W Press and hold the WPS Button for one second. When the connection is established, The Wi-Fi ( ) LED is lit blue. For QL-820NWB a). Press the Menu and ▼ Buttons to select [WLAN] menu, and then press the OK Button. b). Press the ▼ Button to select the [WPS Button Push] menu, and then press the OK Button. When the connection is established, the WLAN icon appears on the Label Printer LCD. Note • Computers and mobile devices that are on the same network as the Label Printer will have access to the Label Printer. • The Label Printer will try to connect using WPS for two minutes. If the WPS Button (QL-810W) or OK Button (QL-820NWB) is pressed during that time, the Label Printer will continue trying to connect for an additional two minutes. • You can also configure this using the PIN code. 27