Brother International QL-810W Users Guide - Page 34
Infrastructure Mode, Communication Settings, Infrastructure and Wireless Direct, Wireless Direct - manual
View all Brother International QL-810W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Printing Using a Computer (P-touch Editor) 4 Select [Direct Mode], and then press the OK Button. The Wireless Direct icon appears on the LCD. For Windows Connect the Label Printer and computer with a USB cable. Start the Printer Setting Tool on your 2 computer, and click [Communication Settings]. Select [Infrastructure and Wireless Direct] or [Wireless Direct] for [Selected Interface] in [Communication Settings] in the [General] tab, and confirm the [Wireless Direct] tab. For more information, see Communication Settings for Windows on page 40. For Mac Start the Printer Setting Tool on your computer, and select [On] for [Wireless Direct] in the [Wireless LAN] tab. b Use your computer to select the SSID of the Label Printer ("DIRECT-*****_QL-810W" or "DIRECT- *****_QL-820NWB" where ***** is the last five digits of the product serial number). If required, enter the password (810*****/820***** where ***** is the last five digits of the product serial number). Note • You can change the Label Printer's network settings using the Printer Setting Tool. For more information, see Wireless Settings on page 46. • The Printer Setting Tool also allows you to apply the network settings changes to multiple Label Printers. For more information, see Applying Setting Changes to Multiple Printers on page 50. • You can find the serial number label in the DK Roll Compartment of the Label Printer. • You cannot connect to the Internet on your computer via Wi-Fi while using Wireless Direct. • The SSID can also be entered using the LCD. Select the SSID from the displayed list, or press the ▼ Button to select the [Direct Manual setting], and then manually enter the SSID and password. Push the Cancel Button several times to return to the previous screen until it is displayed. Infrastructure Mode 2 Infrastructure Mode allows you to connect the Label Printer to a computer via a Wi-Fi access point/router. Before You Begin First, you must configure the Wi-Fi settings of the Label Printer to communicate with your Wi-Fi access point/router. After the Label Printer is configured, computers on your network will have access to the Label Printer. Important • If you are going to connect the Label Printer to your network, we recommend that you contact your system administrator before installation. You must confirm your Wi-Fi settings before you proceed with this installation. • To configure the Wi-Fi settings again, or if the status of the Wi-Fi connection for the Label Printer is unknown, reset the Wi-Fi settings of the Label Printer. For QL-810W 1 Press and hold the Power ( ) Button to turn the Label Printer off. 24