Brother International HL-L3230CDW Online Users Guide HTML - Page 329

Level 1, Description, FAQs & Troubleshooting, FAQs &amp, Troubleshooting

Page 329 highlights

Level 1 Level 2 Level 3 Description TCP/IP WINS Server Primary Specify the IP address of the primary WINS server. Secondary Specify the IP address of the secondary WINS server. DNS Server Primary Specify the IP address of the primary DNS server. Secondary Specify the IP address of the secondary DNS server. APIPA - Allocate the IP address from the link-local address range automatically. 1 IPv6 - Turn the IPv6 protocol on or off. For more detailed information, go to your model's FAQs & Troubleshooting page on the Brother support website at support.brother.com. Ethernet - - Choose the Ethernet link mode. Wired Status - - Display the Ethernet link status. MAC Address - - Display the MAC address of the machine. Network Reset - - Restore all network settings of your machine to the factory settings. 1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static', you must manually enter an IP address from the machine's control panel. [Network] For wireless network models Level 1 WLAN Level 2 Level 3 Level 4 Descriptions TCP/IP Boot - Method Choose the IP method that best suits your needs. IP Address - Enter the IP address. Subnet - Mask Enter the Subnet mask. Gateway - Enter the Gateway address. Node Name - Enter the Node name. WINS - Config Select the WINS configuration mode. WINS Server Primary Specify the IP address of the primary WINS server. Secondary Specify the IP address of the secondary WINS server. DNS Server Primary Specify the IP address of the primary DNS server. Secondary Specify the IP address of the secondary DNS server. APIPA - Allocate the IP address from the link-local address range automatically 1. IPv6 - Turn the IPv6 protocol on or off. For more detailed information, go to your model's FAQs & Troubleshooting page on the Brother support website at support.brother.com. Setup Wizard - - Configure the wireless network settings using the setup wizard. WLAN Assistant - - Configure your wireless network settings using the Brother installation disc. WPS - - Configure your wireless network settings using the one-button push method. 324

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357

Level 1
Level 2
Level 3
Description
TCP/IP
WINS Server
Primary
Specify the IP address of the primary WINS server.
Secondary
Specify the IP address of the secondary WINS server.
DNS Server
Primary
Specify the IP address of the primary DNS server.
Secondary
Specify the IP address of the secondary DNS server.
APIPA
-
Allocate the IP address from the link-local address range
automatically.
1
IPv6
-
Turn the IPv6 protocol on or off. For more detailed information, go to
your model's
FAQs & Troubleshooting
page on the Brother
support website at
support.brother.com
.
Ethernet
-
-
Choose the Ethernet link mode.
Wired Status
-
-
Display the Ethernet link status.
MAC Address
-
-
Display the MAC address of the machine.
Network Reset
-
-
Restore all network settings of your machine to the factory settings.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’, you must manually enter an IP address from the machine's control panel.
[Network]
For wireless network models
Level 1
Level 2
Level 3
Level 4
Descriptions
WLAN
TCP/IP
Boot
Method
-
Choose the IP method that best suits your needs.
IP Address
-
Enter the IP address.
Subnet
Mask
-
Enter the Subnet mask.
Gateway
-
Enter the Gateway address.
Node Name
-
Enter the Node name.
WINS
Config
-
Select the WINS configuration mode.
WINS
Server
Primary
Specify the IP address of the primary WINS server.
Secondary
Specify the IP address of the secondary WINS
server.
DNS Server
Primary
Specify the IP address of the primary DNS server.
Secondary
Specify the IP address of the secondary DNS
server.
APIPA
-
Allocate the IP address from the link-local address
range automatically
1
.
IPv6
-
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's
FAQs &
Troubleshooting
page on the Brother support
website at
support.brother.com
.
Setup Wizard
-
-
Configure the wireless network settings using the
setup wizard.
WLAN Assistant
-
-
Configure your wireless network settings using the
Brother installation disc.
WPS
-
-
Configure your wireless network settings using the
one-button push method.
324