Brother International HL-L3230CDW Online Users Guide HTML - Page 221
No Drum Unit, No Belt Unit
View all Brother International HL-L3230CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Error Message Jam Inside Jam Manual Feed Jam Rear Jam Tray1 Limit Exceeded Manual Feed Media Type Mismatch No Belt Unit No Drum Unit No Paper Tray1 No Toner No Tray1 No Waste Toner Out of Memory Print Data Full Cause Action The paper is jammed inside the machine. Open the top cover, remove the toner cartridges and drum unit assembly, and gently remove the jammed paper. Reinstall the toner cartridges and drum unit assemblies into the machine. Close the top cover. The paper is jammed in the manual feed slot of the machine. Gently remove the jammed paper from in and around the manual feed slot. Reload the paper into the manual feed slot, and then press Retry. The paper is jammed in the back of the machine. Open the fuser cover and gently remove the jammed paper. Close the fuser cover. If the error message remains, press Retry. The paper is jammed in the indicated paper tray. Pull out the paper tray and gently remove all jammed paper as shown in the animation on the LCD. The print limit set in Secure Function Lock 3.0 was reached. Ask your administrator to check your Secure Function Lock Settings. Manual was selected as the paper Place paper in the manual feed slot. source in the printer driver, but there is no paper in the manual feed slot. The media type specified in the printer driver differs from the paper type specified in the machine's menu. Load the correct type of paper in the tray indicated on the LCD, and then select the correct media type in the Paper Type setting on the machine. The belt unit is not installed or not Reinstall the belt unit. installed correctly. The drum unit is not installed correctly. Reinstall the toner cartridges and drum unit assembly. The machine failed to feed paper from the indicated paper tray. Do one of the following: • Refill paper in the paper tray indicated on the LCD. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. • Do not overfill the paper tray. The toner cartridge is not installed or not installed correctly. Remove the toner cartridge and drum unit assembly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back into the drum unit. Reinstall the toner cartridge and drum unit assembly back in the machine. If the problem continues, replace the toner cartridge. The paper tray is not installed or Reinstall the paper tray indicated on the LCD. not installed correctly. The waste toner box is not Reinstall the waste toner box. installed or not installed correctly. The machine's memory is full. Press and reduce the print resolution. The machine's memory is full. Press and delete the previously stored secure print data. 216