Brother International HL-L3230CDW Online Users Guide HTML - Page 247
Error Messages, Cause, Action, Username, Password, Authentication Setting, Cancel, Print, Error
View all Brother International HL-L3230CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
Error Messages Cause Action device has been configured via DHCP. Server Timeout, contact your The Brother machine cannot connect • administrator. to the server for the Store Print Log to Network feature. • • Make sure your server address is correct. Make sure your server is connected to the network. Make sure the machine is connected to the network. Wrong Date&Time, contact your administrator. The Brother machine does not obtain • Make sure the settings to access the time from the SNTP time server. the SNTP time server are configured correctly in Web Based Management. HL-L3270CDW Error Messages Cause Action A device is already connected. Press [OK]. The maximum number of mobile After the current connection between your Brother devices are already connected machine and another mobile device has shut down, try to to the Wi-Fi Direct network when configure the Wi-Fi Direct settings again. You can confirm the Brother machine is the the connection status by printing the Network Group Owner (G/O). Configuration Report. Authentication error, contact your administrator. Your authentication setting for the Store Print Log to Network feature is not correct. • Make sure the Username and Password in Authentication Setting are correct. If the username is part of a domain, enter the username in one of the following styles: user@domain or domain\user. • Make sure the SNTP time server settings are configured correctly so the time matches the time used for authentication by Kerberos or NTLMv2. Connection Error Other devices are trying to connect to the Wi-Fi Direct network at the same time. Make sure there are no other devices trying to connect to the Wi-Fi Direct network, and then try to configure the WiFi Direct settings again. Connection Failed The Brother machine and your mobile device cannot communicate during the Wi-Fi Direct network configuration. • Move the mobile device closer to your Brother machine. • Move your Brother machine and the mobile device to an obstruction-free area. • If you are using the PIN Method of WPS, make sure you have entered the correct PIN. File access error, contact your administrator. The Brother machine cannot • Make sure the stored directory name is correct. access the destination folder for • Make sure the stored directory is write-enabled. the Store Print Log to Network feature. • Make sure the file is not locked. Log Access Error In Web Based Management, you have selected the Cancel Print option in the Error Detection Setting of Store Print Log to Network. Wait for about 60 seconds until this message disappears from the LCD. No Device When configuring the Wi-Fi • Direct network, the Brother machine cannot find your mobile • device. • • Make sure your machine and mobile device are in the Wi-Fi Direct mode. Move the mobile device closer to your Brother machine. Move your Brother machine and the mobile device to an obstruction-free area. If you are manually configuring the Wi-Fi Direct network, make sure you have entered the correct password. 242