Brother International HL-L3230CDW Online Users Guide HTML - Page 328
Level 1, Descriptions, For wired network models
View all Brother International HL-L3230CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 328 highlights
Level 1 WLAN Wi-Fi Direct Network Reset Level 2 WLAN Status Level 3 Channel Level 4 - Speed - SSID - Comm. Mode - MAC Address - - Set to Default - - WLAN Enable - - Push Button - - PIN Code - - Manual - - Group Owner Device Info. Status Info. - - Device - Name SSID - IP Address - Status - Signal - I/F Enable - Channel - Speed - - - - - Descriptions Display the channel in use when Status is Active. Display the connection speed when Status is Active. Display SSID. Display the current Communication mode. Display the MAC address of the machine. Restore wireless network settings of your machine to the factory settings. Turn the wireless interface on or off. Configure your Wi-Fi Direct network settings using the one-button push method quickly. Configure your Wi-Fi Direct network settings using WPS with a PIN code quickly. Configure your Wi-Fi Direct network settings manually. Set your machine as the Group Owner. View your machine's device name. Display the Group Owner's SSID. Display your machine's IP Address. Display the Wi-Fi Direct network status. Display the current Wi-Fi Direct network signal strength. When your machine acts as Group Owner, the LCD always displays Strong. Display the channel in use when the Status is G/O Active or Client Active. Display the connection speed when the Status is G/O Active or Client Active. Enable or disable the Wi-Fi Direct connection. Restore all network settings of your machine to the factory settings. 1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static', you must manually enter an IP address from the machine's control panel. [Network] For wired network models Level 1 TCP/IP Level 2 Level 3 Boot Method - IP Address - Subnet Mask - Gateway - Node Name - WINS Config - Description Choose the IP method that best suits your needs. Enter the IP address. Enter the Subnet mask. Enter the Gateway address. Enter the Node name. Select the WINS configuration mode. 323